Denmark · udbud.dk and TED

Public tenders in Denmark: how to find them on udbud.dk and TED

Danish public tenders are published in two places. Procurements above the EU thresholds go to TED, while smaller national tenders and planned purchases appear on the state portal udbud.dk. Below: how the two sources differ, which thresholds apply in 2026–2027, what Danish buyers ask for and where foreign bidders tend to go wrong.

Updated · By Jurgis Mickevičius, Data Innovations

What udbud.dk is and what goes to TED

udbud.dk is Denmark's state portal for public procurement notices, run by the Danish Competition and Consumer Authority (Konkurrence- og Forbrugerstyrelsen, KFST). It was relaunched on 12 November 2024 as part of MitUdbud, an EU co-financed project. Since then notices are built on the eForms standard, so they look much like TED notices.

What matters for a supplier is where each type of notice ends up:

  • Procurements above the EU thresholds must be published in TED. KFST says the new udbud.dk also lets you search EU tenders from Danish authorities, but the original notice is in TED.
  • Procurements below the EU thresholds that must be advertised are published on udbud.dk. They do not reach TED.
  • Expected purchases (forventet indkøb, formerly called indkøbsplan) are published on udbud.dk. State authorities have to announce them; for other buyers it is optional. They work like a prior information notice: the buyer shows what it plans to buy, though the plan can still change.

Buyers log in to udbud.dk with MitID Erhverv, the Danish business e-ID. Anyone can search the notices. You can set up a free search agent (søgeagent) that alerts you to new notices in your field.

Udbudsloven and the national rules

The main law is Udbudsloven, the Danish Public Procurement Act, in force since 2016. Part II covers procurements above the EU thresholds. Part IV covers supplies and services below the thresholds when the contract has a clear cross-border interest (klar grænseoverskridende interesse). In that case the buyer must advertise the contract on udbud.dk. The buyer assesses this case by case.

Works below the EU threshold currently fall under a separate law, known as tilbudsloven (the Act on calling for tenders in the construction sector). According to KFST:

  • up to 300,000 DKK excluding VAT, one bid is enough;
  • from 300,000 to 3 million DKK, the buyer asks for bids from at least two and at most three suppliers (underhåndsbud);
  • above 3 million DKK and up to the EU threshold, an open or restricted tender (licitation) is required.

In February 2026 a bill (L 113) was put before the Folketing to repeal tilbudsloven and move below-threshold works into Udbudsloven. According to the Folketing's records the bill lapsed without being passed. The subject may come back, so check the version in force on retsinformation.dk and the KFST website before you bid.

Thresholds in 2026–2027

The new EU thresholds apply from 1 January 2026 and are set by Commission Delegated Regulation (EU) 2025/2152. Denmark also publishes them in kroner. All amounts exclude VAT:

ContractEURDKK
State authorities: supplies and services140,0001,044,400
Municipalities, regions and other authorities: supplies and services216,0001,611,360
Works5,404,00040,313,840
Utilities: supplies and services432,0003,222,720
Social and other specific services (light regime)750,0005,595,000

Procurements advertised by 31 December 2025 keep the previous thresholds. For how thresholds are calculated, see EU thresholds.

What this means in practice

  • A municipal service contract above 1.6 million DKK will be in TED
  • Works below 40 million DKK do not reach TED: they appear on udbud.dk or, if small, are not advertised at all
  • Danish buyers place much of their spending through framework agreements (rammeaftaler)

Where the documents are and how to bid

A notice on udbud.dk or in TED tells you who is buying what and by when. The procurement documents themselves (udbudsbetingelser, kravspecifikation, draft contract, price schedule) are usually held in the e-tendering system the buyer has chosen. In Denmark Mercell and EU-Supply are common, but other systems are used too. The link is always in the notice. You register there, mark your interest in the tender, ask questions and submit your bid.

When you plan your market, look at central purchasing bodies such as SKI (Staten og Kommunernes Indkøbsservice). They set up framework agreements that many municipalities then buy from. If you are not on such a framework, subcontracting may be your only way into that segment for several years.

ESPD, serviceattest and qualification

In procurements above the EU thresholds you first fill in the ESPD (Det fælles europæiske udbudsdokument). In Denmark it is completed electronically inside the tendering system as part of the bid. With it you confirm that you meet the qualification requirements and are not subject to exclusion grounds. More on the form: what the ESPD is and how to fill it in.

The buyer normally asks for supporting evidence only from the bidder it intends to award. Danish companies provide a serviceattest, a certificate issued through virk.dk by the Danish Business Authority (Erhvervsstyrelsen), which collects data from the tax authority, ATP, the bankruptcy court and other bodies. A foreign company provides the equivalent documents from its home country, typically:

  • a trade register extract and criminal record certificates for the company and its management;
  • certificates showing no tax or social security debts;
  • proof that the company is not bankrupt or in liquidation;
  • annual accounts, references with client contacts and certificates.

A serviceattest has no fixed validity; the buyer decides how old a document may be, so check the date rules and order fresh certificates in time.

The winner is chosen on the most economically advantageous tender. Price is rarely the only criterion; the weightings are in the documents.

The RUT register and labour clauses

If you post workers to Denmark after winning, your company must register in RUT (Registret for Udenlandske Tjenesteydere, the Register of Foreign Service Providers). Registration is done on virk.dk no later than the start of the service, and changes must be reported by the next working day. From 1 January 2026, registering workers without an EU/EEA passport also requires uploading their work permits. Failing to register can lead to a fine.

Public contracts often contain labour clauses (arbejdsklausuler). For state authorities they follow Circular No. 9471 of 2014, based on ILO Convention No. 94, and many municipalities and regions include them on their own initiative. They require that workers, including those of subcontractors, get pay and conditions no less favourable than under the relevant Danish collective agreement. The buyer can ask for documentation. Price your bid on Danish wage levels, not home-country ones.

Language, e-invoicing and complaints

Language. Documents are almost always in Danish. Some buyers accept a bid or parts of it in English, but this is not the rule. The language is stated in the notice. If in doubt, ask through the tendering system while questions are still allowed.

E-invoicing. Invoices to Danish public buyers are sent electronically through the NemHandel infrastructure in OIOUBL or Peppol BIS format. The Danish Business Authority plans to replace OIOUBL step by step with a Peppol-based standard. Before signing, check that your accounting software or service provider can send these invoices.

Complaints. Disputes go to the Complaints Board for Public Procurement (Klagenævnet for Udbud). Under the act governing the board, in procurements above the EU thresholds the contract may not be signed until a standstill period has passed: 10 calendar days if the award notice was sent electronically, 15 days if sent by letter. A complaint filed during the standstill period stops the contract from being signed until the board decides whether to suspend it. More: what the standstill period is.

Common mistakes of foreign bidders

  • Watching only TED. Works and smaller service contracts are often published only on udbud.dk.
  • Getting the time zone wrong. Deadlines are in Danish time; "12:00" in Copenhagen is 13:00 in Vilnius.
  • Searching in English. Danish buyers write in Danish, so search for words like "tagdækning" (roofing), "rengøring" (cleaning) or "vinduer" (windows), together with CPV codes (see CPV codes).
  • Leaving RUT registration to the last day instead of building it into the project plan.
  • Pricing on home-country wages. Labour clauses also apply to subcontractors, and breaches can trigger contractual sanctions.
  • Missing clarifications because you did not register for the tender in the tendering system, where answers and changes are published.

A weekly routine that works

On Monday, go through new TED notices for your CPV codes and read the emails from your udbud.dk search agent. Register in the tendering system for the tenders you want and note the deadline in your own time zone. Midweek, read the answers to questions and check you have every certificate. On Friday, look at expected purchases on udbud.dk and at award notices: who won, for how much, and who might make a partner. Once a month, renew certificates that go out of date quickly.

More on the region: Nordic public procurement.

How MarketScope helps

MarketScope collects Danish tenders through TED (the official API) using your CPV codes and keywords. That means you see Danish notices published in TED, mainly procurements above the EU thresholds. Notices published only on udbud.dk are not collected at the moment, so for smaller national tenders you still need an udbud.dk search agent.

Alongside tenders, MarketScope follows Danish business news (for example Licitationen and Børsen RSS feeds), which carry project signals before a tender appears. Where available, winners are enriched with data from the Danish company register (CVR), obtained through a public intermediary. Notices for the same procurement are linked into one project, and each project gets a score from 0 to 100 based on your priorities. Every item links to the original notice.

Open construction tenders in Denmark: public list. Other countries and sectors: all tender lists.

What we don't do

  • We do not submit bids for you or fill in tender documents
  • We do not copy content from paid tendering systems: you download the documents from the system the notice points to
  • We do not collect notices published only on udbud.dk

Frequently asked questions

Where are Danish public tenders published?

Procurements above the EU thresholds are published in TED. Smaller national tenders that must be advertised, and planned purchases (forventet indkøb), appear on udbud.dk, the state portal run by the Danish Competition and Consumer Authority (KFST).

What are the EU thresholds in Denmark for 2026–2027?

Excluding VAT: 140,000 EUR (1,044,400 DKK) for supplies and services bought by state authorities, 216,000 EUR (1,611,360 DKK) for other contracting authorities and 5,404,000 EUR (40,313,840 DKK) for works.

What is tilbudsloven?

It is the law that currently governs works contracts below the EU threshold. Up to 300,000 DKK one bid is enough, from 300,000 to 3 million DKK the buyer asks for two or three bids, and above 3 million DKK an open or restricted tender is required.

Does a foreign company need a Danish serviceattest?

A serviceattest is issued by the Danish Business Authority for Danish companies. A foreign company provides equivalent home-country documents: a register extract and certificates on taxes, social security, criminal records and solvency.

What is the RUT register?

A foreign company posting workers to provide services in Denmark must register in RUT on virk.dk no later than the start of the service. Changes must be reported by the next working day, and failing to register can lead to a fine.

Does MarketScope show all Danish tenders?

No. MarketScope collects Danish tenders through TED, so you see Danish notices published in TED, mainly above the EU thresholds. Notices published only on udbud.dk are not collected at the moment.

See what your market is doing this week

We will show you monitoring set up for your topics, countries and competitors, with real data.